Perimeter Protection Microphonic Cable Intrusion Detection Sensor NVS will install and intergrate the new Intelli-FLEX™ system to the existing fencing structure. Intelli-FLEX™ is a unique microphonic intrusion detection system for outdoor, fence-mounted perimeter security applications. By analyzing signals generated by the minute flexing of a proprietary triboelectric coaxial sensor cable, specific characteristic intrusion signatures are analysed by a powerful digital Signal Processor. Raising alert to the control room and activating a PTZ camera. Installation is quick and simple. Inexpensive UV-resistant tie wraps secure the sensor cable to the fence at 30 cm (1.0 ft.) intervals. The Intelli-FLEX Signal Processor can monitor two independent zones, each with a maximum of 305 m (1000 ft.) of sensor cable. Some Features: • Fence mounted cable • Low cost • Quick and Easy to Install • Digital Signal Processing • High Probability of Detection • Independent Detection of Fence Cutting and Climbing A programmable microprocessor enables the user to set the operating parameters for each zone using a simple plug-in Configuration Module. Separate parameters are set for cut and climb detection, resulting in independent alarm processing to optimize detection and minimize false alarms. Since the coaxial sensor cable is microphonic, an optional plug-in audio module enables the user to “listen-in” to the fence activity. This feature provides an additional low-cost tool for assessing the nature of an intrusion attempt. More systems are available on request.